Skip to content

The Quilted Print @ Frogman’s Print Workshops

quiltbaitI_01-1024x568

More pics of the above piece may be found, here: https://www.orangebarrelindustries.com/hannah/main/?projects=quiltbait-i-culdesac

This post is for our class at Frogman’s Print Workshops, First Session, the week of July 2nd 2017.

Description

This workshop utilizes the oldest form of printmaking, relief, in combination with found, re-purposed fabrics and basic machine and hand sewing to create quilted collages. Do you have old clothes, bedding, and other fabric scraps you love that need a new life? This workshop is for you!

Sanders_Hannah_01

The workshop will begin with transfer, carving and printing demonstrations. Subsequent demonstrations include cutting and pinning prints on fabric into collage surfaces using a variety of stitch types in hand and machine embroidery, addition of embellishments, appliqué, reverse appliqué, finishing techniques, and hanging solutions. These processes provide a gateway into three dimensional creations, performance, and installation. The class will work together on collaborative work at the end to explore these possibilities.

Techniques We Will Cover

  • Relief printing on fabric, tips & hints for drawing/transferring, carving, and printing block prints on fabric.
  • Basic sewing machine use and maintenance
  • Appliqué and Reverse Appliqué
  • Machine Embroidery
  • Stuffing and dimensional work with up-cycled materials
  • Basic Crochet
  • Optional/Additional: Hand sewing/embroidery, quilting, binding, banner-making, etc.

Exhaustfull-e1477565450637-768x1024

Resources

 

How To Thread the Machines and Wind the Bobbins

Make sure you are using the correct bobbin for each machine. Make sure you thread the machine properly on the top and wind the bobbin correctly and install it correctly.

  • The Kenmore
    • uses the metal bobbins with holes in top and bottom all the way around.
  • The Singer Stylist
    • The Singer Stylist (white with digital numbers for stitch selection) and the Brother both use the 15J plastic bobbins.
  • The Brother
    • The Singer Stylist (white with digital numbers for stitch selection) and the Brother both use the 15J plastic bobbins.
  • The Black metal older Singer machine

IMG_3168

    • IMG_3169
    • Mitsubishi_HA_1_IB
    • leveecloud-1019x1024

Somewhat Related Stories

installationlarge riverdetail

Troubleshooting (there is more in our PDF handout near the top of this page

  • Did you thread the machine correctly?
  • Did you wind the bobbin correctly and check that it is installed correctly?
  • Adjust stitch length and tension according to fabric and thread you are using8-straight-stitch-bottom. Use a test scrap of fabric and make adjustments tighter and looser until it is sewing well without puckering fabric (too tight) or stitches falling out (too loose). 2012-05
  • Most machines have single top tension adjustment, but some machines have an additional tension adjustment for bobbin thread.
  • If all else is correct and machine is skipping stitches, try a fresh needle. The old one may be dull.
  • Periodically, the bobbin and bobbin casing should be removed. Use a small paint brush to dust out lint, and a drop of sewing machine oil in the proper spot (varies by machine) will help it to keep running smoothly.

 

Leave a Reply to Orange Barrel Industries » Dispatch: The Quilted Print at Frogman’s Print Workshops Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.